Epoxy Floor Coating Flake Kit ‘How to’ Video!
We have always had the components to make this system, but we’ve just never put them together in an easy to use kit until now! So we did, and now we have an instructional video to accompany it.
The Vuba Epoxy Floor Coating Flake Kit is a very hard wearing, decorative coating designed for commercial and industrial use. For lighter duty areas we have a Liquid Motion Kit made up of single part components, but we’re not focusing on that here!
There is a complete tutorial video, and it is also broken down into bite size pieces. Here for the first of the tutorial videos is the guide to preparing a floor ready for a paint coat:
Once you have a suitable substrate, the next stage in the kit is to mix and apply our epoxy primer, Epiprime. Epiprime seals and consolidates the subfloor, ensuring it is ready to receive the epoxy coating. You can watch how to mix any of our two part epoxy products in this video below. The same process applies for primers as well as coatings. Hopefully you will see that two part products are fairly simple to work out!
Allow the primer to cure overnight, and then it is time to apply the coloured epoxy coating. The epoxy coating in this kit is Ultracoat, but you could replace with Epoxyshield or EP Shield Supreme. We again mix the two part product as we saw in the video previously.
Epoxy coatings are applied using a medium pile roller, in a very similar way